Guest Book Archives

Members Rigs Trail Rides
eMail
Guest Book
Weather
Bit Of History
Links
Misc Photos
Vendors & Services
Club Events
IH Events Directions
Parts & Vehicles
Tech Write-Ups
Legal Info

 

 

2009-2013 Guest Book Archives

 

 


complete axles wanted

Submitted by Frank Herboth <sfherboth@yahoo.com> on 30/Apr/2009

Message:

looking for 3:73 gear ratio rear axle complete and ready to bolt in, would also consider good 3:54 ratio but need both front and rear if I go that route call me at 1-618-483-5493 if you have something for me thanks

Replies to this post

  • Submitted by Jason Roedel <jason.roedel@charter.net> on 01/May/2009 in reply to complete axles wanted posted by Frank Herboth on 30/Apr/2009

    Message:

    Frank -- send you an email.

  • Submitted by Frank herboth <sfherboth@yahoo.com> on 01/May/2009 in reply to Re: complete axles wanted posted by Jason Roedel on 01/May/2009

    Message:

    I replied to your other email dont know which one you check the most so I thought I better do both. What price are we looking at? I may just take the gears out of your axles for now if the price is right and then work on the soa later for something else or maybe even this scout. thanks for the reply hope all is well with the family see you sometime soon probably the 4th at bobs if not before. thanks again Frank


    Swap decoys for 35x12.5x15 tires

    Submitted by Kurt on 01/May/2009

    Message:

    This is a long shot, but here goes......

    I need four 35x12.5x15 tires for my Suburban, because my old tires (Super Swamper TSL) aren't good enough to last much longer. I'm not looking for new tires, but good enough to pass inspection and to drive safely on the highway. (My wheels are fine, so I just need the tires).
    I don't have the money right now, so I'm hoping to trade a dozen super mag Canada Goose shells for the tires. I figured maybe someone knows some boggers or climbers who'd possibly have an extra set of tires around.


    Transmission/transfercase

    Submitted by Tyson Elsken <telsken@sbcglobal.net> on 12/May/2009

    Message:

    T-98 transmission and Dana model 20 transfercase with the bellhousing for a 6-cylinder from 67 IH scout. 39000 original miles. The setup came from a scout that went through a tornado. Location is Kansas. I Can e-mail pictures. I would like 450.00 out of it.


    4 cylinder motors

    Submitted by justin ross <emailthisss@yahoo.com> on 02/Jun/2009

    Message:

    2 motors for sale, along with 3 speed tranny. 2.5 liter bolted to 3 speed manual. ran when removed. also a non running 3.2 liter. Has cracked head, came with scout when I bout it. Was told it was the original engine (1967). Make offer for both engines and tranny.

    Replies to this post

    Submitted by Craig on 26/Jul/2009 in reply to 4 cylinder motors posted by justin ross on 02/Jun/2009

    Message:

    Do you still have the engine/tranny?


    Misc. parts

    Submitted by Don Henke on 17/Jun/2009

    Message:

    Scout grills:
    '76 original--good cond. $45.00
    '78/'79--excellant cond.-black $65.00
    Truck grill--'66 pickup/travelall, good cond.$45.00
    Scout seats from my '72, good cond.
    front and rear, tan & brown $100. for the pair.
    Trailer hitch off '73 Travelall--needs paint$35.00
    Auto tranny out of 1980 scout, ? cond. $make offer.
    Danna 20 transfer case, excellent cond., checked out by mechanic $45.00
    Manuel chock kit--new, $4.00
    Block heater,new, $10.00

    All items subjest to offers.

    Replies to this post

    Submitted by Don Henke on 04/Jul/2009 in reply to Misc. parts posted by Don Henke on 17/Jun/2009

    Message:

    I also have other parts, please ask.
    Cub riding lawnmower-804, complete, runs.
    Cub lawn tractor-122, not running but all parts there but mower. $$125.00 for the pair.
    Everthing must go soon--make offers!

    You can reach me at 618-514-9616
    or dehenke@msn.com

    Submitted by Don Henke <dehenke@msn.com> on 19/Jul/2009 in reply to Re: Misc. parts posted by Don Henke on 04/Jul/2009

    Message:

    More parts for sale; Scout II parts
    Step bumper--good cond. black
    Dash covers, I wood grain, 1 black
    A/C compressor-used
    Drivers side inside parts
    Door handles also tailgate handle
    License plate holder
    Sliding side windows-2 pair, 1 with a scene
    with horses etched on it--pretty neat
    Set of manifolds-I believe off a 345
    Main drive shaft
    Starter rebuilt--not sure if has been used
    1 valve cover gasket

    Call for pricing--618-514-9616


    WTB: Scout 80/800 bumper mounting brackets

    Submitted by Jason Roedel <jason.roedel@charter.net> on 19/Jun/2009

    Message:

    Need a pair of Scout 80/800 bumper mounts (for c-channel OEM style bumper).

    Replies to this post

    Submitted by craig on 25/Jul/2009 in reply to WTB: Scout 80/800 bumper mounting brackets posted by Jason Roedel on 19/Jun/2009

    Message:

    Front or rear?

    Submitted by Jason <jason.roedel@charter.net> on 05/Aug/2009 in reply to Re: WTB: Scout 80/800 bumper mounting brackets posted by craig on 25/Jul/2009

    Message:

    Lookig for the rear. Do you have them?

    Submitted by Craig on 26/Aug/2009 in reply to Re: Re: WTB: Scout 80/800 bumper mounting brackets posted by Jason on 05/Aug/2009

    Message:

    sorry I lost your phone number I'm going to see Don Thursday. I'll get ahold of you or call me.

    Submitted by Jason on 24/Sep/2009 in reply to Re: Re: Re: WTB: Scout 80/800 bumper mounting brackets posted by Craig on 26/Aug/2009

    Message:

    Craig - if you still have the bumper call me. I'll be in B-ville with the club event next weekend (03-Oct).

    Thanks.
    Jason


    392 & D300

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 07/Jul/2009

    Message:

    I'm looking for a 392 to swap into my L-series pickup. And a D300 for the back of the POWERGLIDE I adapted... This was origionally ging to be powered by a cummins 12v but I'll save that motor for a scout!

    618-610-6897

    Submitted by frank munoz <frankamunoz@gmail.com> on 09/Aug/2009 in reply to 392 & D300 posted by Bryan Quirk on 07/Jul/2009

    Message:

    hello, I have a 1974, 392 engine complete with alternator, starter, distributor (points)not running, with trans 727 torque/flight, for $200.00 562-864-6940 frank Norwalk california.

    Submitted by Bryan Quirk on 10/Aug/2009 in reply to Re: 392 & D300 posted by frank munoz on 09/Aug/2009

    Message:

    >> E-mail sent


    WTB: Scout II soft top hardware

    Submitted by matt dobbs <lugnutz78@hotmail.com> on 22/Jul/2009 in reply to WTB: Scout II soft top hardware posted by Jason Roedel on 29/Apr/2009

    Message:

    any luck??? i am missing some parts as well, mainly the bows. thinking i have to fabricate. like to find someplace to get parts..

    if it helps, just found out that a few weeks ago a company bought all the stuff from stc and hoping to get something goin toward end of year first part of 2010.


    Free Stuff L-series pickup

    Submitted by Bryan Quirk <Bmquirk@ckor.com> on 10/Aug/2009

    Message:

    I have a 1951 L-series. Free truck, lots of parts here bed-sides and fenders are in great shape, the bed not so good. Free-floating rear end, looks like ford 9". Decent cab. No grill (i kept that for my restore but i can throw in the one off my other l-series which is restorable.) Front wheels are locked up, so its hard to load, the truck is on a trailer right now and i will deliver to a reasonable circumference of millstadt. Otherwise it's going to the scrapper this week. Its not my trailer that its sitting on so time is sensitive.

    P.S. I'm looking for an IH 392, or a good motor for this truck. Trade?

    Replies to this post

    Submitted by Bryan Quirk <Bmquirk@ckor.com> on 13/Aug/2009 in reply to Free Stuff L-series pickup posted by Bryan Quirk on 10/Aug/2009

    Message:

    By the way, my phone # 618-610-6897

    Submitted by Bryan Quirk <Muddyoltires@yahoo.com> on 07/Sep/2009 in reply to Re: Free Stuff L-series pickup posted by Bryan Quirk on 13/Aug/2009

    Message:

    >> its gone, i have pictures of the track-hoe destroying it. got a nice grille and fenders from it. The scrap value was still more than i bought it for!


    1976 Scout II PARTS

    Submitted by Justin Burns <jburns@central.com> on 04/Sep/2009

    Message:

    This was a very very nice scout till an electrical fire under the hood took it away from me 3 weeks ago.
    The interior from the dash back is toast.
    Thses are all good
    Front clip
    Motor - electrical missing
    2- 35x12.50 superswampeers on crome rims (near new)
    axels, transmission, transfercase
    full roll cage
    Frame with 6inches of lift.

    Email me and Ill send you pictures. I want $1000 but will consider ANY offer. I want it gone so I dont have to see what it used to be evry time I walk by it.

    got lots of pictures

    Replies to this post

    Submitted by chris <chris.selz@yahoo.com> on 24/May/2010 in reply to 1976 Scout II PARTS posted by Justin Burns on 04/Sep/2009

    Message:

    i am interested in the roll cage


    parts/projects - things going on

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 07/Sep/2009

    Message:

    Guys, does anybody have an engine (v8) or tranny (from v8) sitting on the ground that i can look at the bolt pattern? I'm trying to fit the JW ultrabell adapter to use me powerglide to see if it will work on a 392.
    Oh, does anybody have a 392 for sale??
    I'm set on the 392 for my 51' l-truck.

    If anybody has the time that i could stop by for a look at the bellhousing i would appreciate it!

    618-610-6897

    Replies to this post

    Submitted by Don Henke on 20/Sep/2009 in reply to parts/projects - things going on posted by Bryan Quirk on 07/Sep/2009

    Message:

    Hey Brian, I have an automatic tranny out of a '78 scout you can look at if you wish, just give me a call:618-514-9616. Don

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 02/Oct/2009 in reply to Re: parts/projects - things going on posted by Don Henke on 20/Sep/2009

    Message:

    Thanks Don, is it at your house?


    complet drivetrain

    Submitted by craig on 24/Sep/2009

    Message:

    I have a complete running gear in my 66' 800 model now that you can hear run, drive, move, what ever, I'm upgrading the complete drivetrain. Both axles have spring over mounts on them but could be used in the stock form with no alterations all brand new u-joint. The front axle has 4.27 gears with locker (factory) not sure but it spins both all the time, new wheel cylinders, newer pads and works great. The rear has 4.27 with locker (factory) not sure but it spins both all the time. New brake pads, wheel cylinders, brake line, works great. 152 4cyl 40-60psi oil pressure, holley 1904 carb new cap, rotor, points taylor wires. runs great minus alt. 3 speed tranny and twin stick transfercase works great good clutch, newer clutch master clyinder I'm willing to sell everything international related (drivetrain only) as one package, belts, hoses, Radiator no leaks. One package deal for 600.00 OBO not sure if this is steep but I just spent over 200.00 on new parts (2) weeks ago.

    Replies to this post

    Submitted by craig on 25/Sep/2009 in reply to complet drivetrain posted by craig on 24/Sep/2009

    Message:

    Just determined that I will not need the frame either so the complete rolling chassis with spring over and steering minus steering box and shocks

    Submitted by craig on 26/Sep/2009 in reply to Re: complet drivetrain posted by craig on 25/Sep/2009

    Message:

    Sold!!!!


    RHD steering box

    Submitted by Craig on 28/Sep/2009

    Message:

    1966 RHD steering box good shape not much play.

    100.00 obo


    1951 L- motor - tranny

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 02/Oct/2009

    Message:

    Im taking the motor and manual transmission out of my 51' l-120 to make room for the 345. If anybody is interested in trade for scout parts, or l-series parts?

    618-610-6897

    Replies to this post

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 20/Mar/2010 in reply to 1951 L- motor - tranny posted by Bryan Quirk on 02/Oct/2009

    Message:

    I still have this going>>


    1967 Scout 800 rust free

    Submitted by dchenson2 <dchenson2@gmail.com> on 23/Oct/2009

    Message:

    1967 scout 800 with chassis and drive trian completely restored and the body is stripped and ready for paint. The engine and transmission have 500 miles on them since being rebuilt. I have all the parts and extras. i would like it to go to someone who will finish it and not part it out.


    Scout II roll bar wanted

    Submitted by Bryan Curtman <clcco@fidmail.com> on 04/Nov/2009

    Message:

    I am in need of an original roll bar for a Scout II. Please let me know price and contact information. Thanks!


    brake booster

    Submitted by Bryan Quirk <bmquirk@ckor.com> on 18/Nov/2009

    Message:

    Hey all, I'm looking for a scoutII brake booster.

    I also have tons of drivetrain stuff for trade or sale. Transmissions motors frames.

    618-610-6897


    SSS Holiday SALE!!

    Submitted by SSS <suprscout@aol.com> on 14/Dec/2009

    Message:

    Sorry for posting so late!!

    SSS's Happy Holidays SALE!!

    --------------------------------------------------------------------------------

    THE SALE BEGINS DEC 10~~! ENDS DEC 14th @ Midnite!

    Click here for details!! www.superscoutparts.com

    ++ Free SSS Hats and/or Apparel given to ALL orders that mention the "Bi State Binders" in the ORDER NOTES/comment area of your online order form!!! (while supplies last) offer good DEC 10 thru DEC 14, 2009 (online orders only)

    HAPPY, SAFE & WARM Holiday wishes to everyone!!

    Team SSS


    Scout,trucks,dana300 forsale

    Submitted by Leon Ross <lfihfarms@yahoo.com> on 09/Jan/2010

    Message:

    I have nice scout II 1977 forsale. Also 1973 1110 auto six cyl stepside great shape. I have a 1968 IH 4wdr short bed pickup deluxe cab w/winch. Also dana 300 for scout manual bull gear. Email or call leave message if dont answer 1-618-530-7724 I dont look on here often. Scout in under my name in members rigs lots more on it now thought.

    Replies to this post

    Submitted by chris selz <chris.selz@yahoo.com> on 01/Jul/2010 in reply to Scout,trucks,dana300 forsale posted by Leon Ross on 09/Jan/2010

    Message:

    how much for the 300


    wanted: scout II tub

    Submitted by Jake P. <jacob.pfaff@sbcglobal.net> on 02/Feb/2010

    Message:

    Looking for a scout II tub front fenders, roll bar, soft top. I've got a nice 77 scout II, 345 runs smooth, 727 auto tranny shifts fine, 4x4 works, frame is in good shape... but the body is rusted out. thanks for the help. i live in Farmington, MO


    Scout II parts wanted...

    Submitted by Mike <scout@colorgx.com> on 18/Feb/2010

    Message:

    I'm looking for the following parts for Scout II
    71/72 front grill - good shape
    15" x 10" Wagon wheel spoke rims
    Hard top for Scout II
    Would also consider buying whole parts vehicle if it is complete.
    email Mike @ scout@colorgx.com
    thanks


    Scout wheels: 3 sets (Rallye, Polycast, Rock Crawlers)

    Submitted by Jason <jason.roedel@charter.net> on 19/Feb/2010

    Message:

    Three sets of Scout wheels for sale (will also work on Jeep CJ, Dodge & Ford trucks with 5 bolt on 5 -1/2" bolt patterns)

    Rallye (15"x7", chrome)- set of four; asking $150/obo

    Polycast (15"x7", 1980 turbine-style) - set of five; asking $200/obo

    Rock Crawler (15"x8", like new, black) - set of four; asking $150/obo

    (314)489-2241

    Replies to this post

    Submitted by Dale A. Young <ydale24@yahoo.com> on 30/Dec/2012 in reply to Scout wheels: 3 sets (Rallye, Polycast, Rock Crawlers) posted by Jason on 19/Feb/2010
    68.99.83.69

    Message:

    Would like to know if you still have the poly cast wheels for sale, and if you have any pictures of them, so I can see them?


    1935 IH Pickup Truck

    Submitted by Bill Dietz <dietz@aeroinc.net> on 24/Feb/2010

    Message:

    Wanted: A window crank 7/16 diameter with 16 splines, and a door handle that mountes on a 5/16 square shaft.


    Free! Good rumning 304

    Submitted by Bryan <muddyoltires@yahoo.com> on 28/Feb/2010

    Message:

    I'm swapping a cummins into my Terra, the 304 in it runs great - up for grabs. come drive it and hear it run. Also have 3 transmissions need to go too. I need a few misc scout parts to trade, give me a call 618-610-6897, scout is in millstadt. Time-sensitive. im looking for dry storage for my 51 l-110 also fyi!

    Replies to this post

    Submitted by Dwain Morrison <dwainmorrison@sbcglobal.net> on 08/Mar/2010 in reply to Free! Good rumning 304 posted by Bryan on 28/Feb/2010

    Message:

    I'm interested. Have also thought about a cummins for my scout.. email me and tell me what you've got going, I'm curious which engine are you putting in? 4 or 6 cylinder?

    Submitted by Bryan Quirk <muddyoltires@yahoo.com> on 20/Mar/2010 in reply to Re: Free! Good rumning 304 posted by Dwain Morrison on 08/Mar/2010

    Message:

    > E-mialing you Dwain
    The 304 and t-19 are out of the scout, springs are getting Beefed & military wrapped. 6b cummins and 5 speed are getting mounted. Reverse shackle in the processs. I only need a few more parts then this puppy's ont the road!


    Scout II front roll bar front hoop - FREE

    Submitted by Jason on 30/Mar/2010

    Message:

    I have what is left of a Scout II front hoop for the factory mounted rollbar.

    It will need new front lower legs and mounting plates as I had to cut them from the rusted out floors.

    This is just the front hoop. Will need to be fixed or use as a pattern to bend your own.

    FREE if you come get it by 05-April, otherwise I'll been adding it to the scrap collection.

    Thanks,
    Jason


    1965 scout

    Submitted by Craig <craig.ridgway@hotmail.com> on 18/Apr/2010

    Message:

    I have a 1965 scout body complete. top, doors, brand new tail light lens, great glass and an extra set of guages and vent windows, a brand new driverside quarter. I know the quarter was a oem part from when I purchased it. I have a clean and clear title for the scout also.

    400.00

    Replies to this post

    Submitted by John on 19/Apr/2010 in reply to 1965 scout posted by Craig on 18/Apr/2010

    Message:

    Were are you located?

    Submitted by Craig on 19/Apr/2010 in reply to Re: 1965 scout posted by John on 19/Apr/2010

    Message:

    By Scott Airforce base.

    Submitted by Craig on 20/Apr/2010 in reply to Re: Re: 1965 scout posted by Craig on 19/Apr/2010

    Message:

    Just wanted to add that it is a Rhd scout and does have a brand new oem quarter on it.


    (5) 15x8 wheels

    Submitted by craig on 21/Apr/2010

    Message:

    I have (5) crager v-5 wheels. they are in great condition and did have tires mounted on them but were never drove on. payed 250.00 plus shipping.

    150.00 obo


    oem quarter panel

    Submitted by craig on 21/Apr/2010

    Message:

    I have and OEM drivers side quarter panel for a 80-800 model. it is tacked on the truck now but could be removed very easy. Payed 500.00 for the quarter selling 250.00 obo.


    77 ih school bus

    Submitted by mark holton on 24/Apr/2010

    Message:

    77 bus/camper; 392, auto, generator, rebuilt engine app. 15000 miles, rebuilt carb, too much to list. contact mark holton 314-852-8372. best offer.


    63 IH Scout for sale

    Submitted by Bob <hrb900@yahoo.com> on 26/Apr/2010

    Message:

    80 pick up original slant 4 cyl. standard trans 4 whl drive.

    project started needs completed.

    sets on good tires you take over.

    no set price make offer.

    clear title

    Replies to this post

    Submitted by Zack <ridin_on_faith@live.com> on 23/Jul/2010 in reply to 63 IH Scout for sale posted by Bob on 26/Apr/2010

    Message:

    just curious if you still have the scout i'd be interested in it. you can give me a call at 660 two32 two305


    anyone need 80-800 parts

    Submitted by craig on 03/May/2010

    Message:

    I'm going to scrap this 1966 body if it does not sell in the next week. If you need any body parts I have them including top, doors, recaro seats, glass, brand new oem driverside quarter, and other parts. Again this must go this week. I will make you a great deal on the complete body with clean and clear title.

    Please someone buy this before it goes to the scrap. I hate to scrap it when so many parts are usable and in good condition.

    Replies to this post

    Submitted by Brian <b_glass_1999@yahoo.com> on 25/May/2010 in reply to anyone need 80-800 parts posted by craig on 03/May/2010

    Message:

    Yes, contact info please.

    Submitted by Rick <Rick@rtssentry.com> on 17/May/2010 in reply to anyone need 80-800 parts posted by craig on 03/May/2010

    Message:

    Do you have any parts left?

    Submitted by Jason on 10/May/2010 in reply to anyone need 80-800 parts posted by craig on 03/May/2010

    Message:

    Craig - can you forward your contact information re: the Scout?

    Thanks,
    Jason
    three-one-four; four eight nine - 2241.


    1975 scout for sale

    Submitted by Jeff <vanjeff@kc.rr.com> on 14/Jun/2010

    Message:

    1975 scout converted to SSII. Fiberglass tub and fenders. Soft top and doors. 345 with AFI fuel injection. 14 bolt and GM dana 44. 4 wheel disc brakes with hydro boost. 727 with jeep tailshaft, klune reduction box( 4:1), and twin sticked Jeep d300. Coplete cage with racing seats tied into cage, and tuffy locking console. Asking $3500.00
    Located in Shawnee,KS

    Jeff nineonethree 269 eight two 14

    Replies to this post

    Submitted by chris selz <chris.selz@yahoo.com> on 06/Sep/2010 in reply to 1975 scout for sale posted by Jeff on 14/Jun/2010

    Message:

    could you send pics? thanks

    Submitted by chris selz <chris.selz@yahoo.com> on 28/Jul/2010 in reply to 1975 scout for sale posted by Jeff on 14/Jun/2010

    Message:

    still have your scout?


    drivetrain parts clearout!

    Submitted by Bryan <muddyoltires@yahoo.com> on 19/Jun/2010

    Message:

    Im Liquidating the parts in the shed, Theyre on short time before the stuff goes to the scrapper. -- cummins swap is done, these are the leftovers and then some

    http://stlouis.craigslist.org/pts/1799642980.html

    618-401-3321

    Replies to this post

    Submitted by Domingo Martinez III <mingito3@yahoo.com> on 03/Sep/2010 in reply to drivetrain parts clearout! posted by Bryan on 19/Jun/2010

    Message:

    IM I TO LATE FOR PARTS?

    Submitted by Bryan <muddyoltires@yahoo.com> on 14/Jul/2010 in reply to drivetrain parts clearout! posted by Bryan on 19/Jun/2010

    Message:

    Axles are sold - Drivetrain came out of the 51' last night, scrapper run is this weekend.... I have a scout rolling chassis that is up in the air on what im going to do with too

    618-401-3321


    '64 Scout 80

    Submitted by Don Henke on 30/Jul/2010

    Message:

    I know of a '64 scout 80 for sale by owner, it looks real good but was been repainted several years ago,it is a half cab with white roof and red body shows several spots where bondo was used. some floor repairs but very little other rust. It runs, shifts and stops good. The owner is anxious to sell, if you have an interest, call me, 618-514-9616 for his number.

    Replies to this post

    Submitted by Don on 03/Aug/2010 in reply to '64 Scout 80 posted by Don Henke on 30/Jul/2010

    Message:

    I forgot to mention that it needs windows for the doors, the sliding type--If anyone knows where to get them, please let me know.


    SSII door inserts (FREE)

    Submitted by Jason on 05/Aug/2010

    Message:

    I have some left over SSII (outer) door inserts if anyone wants them.

    They're really beat up (cracked, broken and won't support soft doors anymore) and maybe only good for a trail rig or a pattern for cutting a steal door to make the jump out doors.

    Thought I'd post here before discarding them.

    Replies to this post

    Submitted by chris selz <chris.selz@yahoo.com> on 21/Aug/2010 in reply to SSII door inserts (FREE) posted by Jason on 05/Aug/2010

    Message:

    im interested..please let me know if you still have them and where i could pick them up..thanks chris


    transfer case and transmission

    Submitted by don henke <dehenke@msn.com> on 08/Aug/2010

    Message:

    I need to sell a Dana 20 transfer case, in excellant condition(been gone over by a mechanic)
    $25.00 also have a 727 auto tranny free to go with it, both from a '79 Traveller

    Replies to this post

    Submitted by chris selz <chris.selz@yahoo.com> on 21/Aug/2010 in reply to transfer case and transmission posted by don henke on 08/Aug/2010

    Message:

    im interested in the items.please let me know if you still have them..thanks chris 314 960 2032

    Submitted by Don Henke on 06/Sep/2010 in reply to transfer case and transmission posted by don henke on 08/Aug/2010

    Message:

    SOLD!


    1976/1980 combo build-up 4-sale

    Submitted by Dave Hoerner <itcadman@yahoo.com> on 16/Aug/2010

    Message:

    1976 Scout II frame/engine(304)rebuilt/transmission underneath a 1980 body. Rolling chassis 70% complete. Body (chemical dip - ready for minor bodywork/assembly/paint) 20% complete.

    Selling as complete package. Will not part out.

    Replies to this post

    Submitted by chris selz on 15/Oct/2010 in reply to 1976/1980 combo build-up 4-sale posted by Dave Hoerner on 16/Aug/2010

    Message:

    what are you askin for it?


    1/2 ton axle

    Submitted by rusty mcdowell <mcd5843@yahoo.com> on 29/Aug/2010

    Message:

    looking for 69-73 1/2 ton 2wd straight axle for a international truck can be reached at 573 330 6182

    Replies to this post

    Submitted by chris <chris.selz@yahoo.com> on 02/Sep/2010 in reply to 1/2 ton axle posted by rusty mcdowell on 29/Aug/2010

    Message:

    are you looking for a dana 44 rear axle? what gear ratio?

    Submitted by rusty on 05/Sep/2010 in reply to Re: 1/2 ton axle posted by chris on 02/Sep/2010

    Message:

    no i need a front axle


    35's bfg

    Submitted by chris selz <chris.selz@yahoo.com> on 29/Aug/2010

    Message:

    i have 5 wheels and tires.tires have 100%tread.wheels are 3" backspacing.contact chris@314 960 2032..thanks


    35 12.50 bfg's n wheels

    Submitted by chris selz <chris.selz@yahoo.com> on 31/Aug/2010

    Message:

    i have 5 tires with 100% tread,mounted on 8x15" wheels.they have 3"backspacing.i bought new tires n wheels to compansate for my gears.please contact chris@314 960 2032..thanks

    Replies to this post

    Submitted by chris selz on 31/Aug/2010 in reply to 35 12.50 bfg's n wheels posted by chris selz on 31/Aug/2010

    Message:

    make offer


    392 engines

    Submitted by Don Henke on 20/Sep/2010

    Message:

    Chris Dicus has 2 392's for sale, both in good shape for $200.00 each, they are in Potosi, Mo.
    His phone # is 573-701-4338


    Rollbar needed 78 Trvlr

    Submitted by Sean <flynnfive@hotmail.com> on 27/Oct/2010

    Message:

    Any one have a Rollbar for a 78 ISII Traveler. Thanks Sean. 636-328-1457 or email.


    looking for parts

    Submitted by chris on 28/Oct/2010

    Message:

    scout two drivers side metel door panal,sliders for rear hatch.holds open the hatch.good dash pad. i have white spoke steel wheels,15x8 and also brand new 15x10 black steel wheels,if anyone is interested.thanks


    '78 Traveler

    Submitted by Don Henke <dehenke@smn.com> on 04/Nov/2010

    Message:

    Larry Kaufman is wanting to sell his '78 Traveler, those of you who have seen it know that it is a beautiful truck, Larry bought it fully restored and has barely used it so it's still in good shape.

    Give Larry a call to discuss price, etc.
    Home# 618-779-4115, cell# 618-488-3725


    Parting out 345

    Submitted by Jesse Coulson <jtc3407@aol.com> on 20/Nov/2010

    Message:

    I have a non running 345 in a 1970 800. I will be parting it out to fund the purchase of a 304. I also have a complete a/c unit that came with the scout, not sure of the history or what works. Started taking the 345 apart the other day. Appears very clean. Give me a call.
    Jesse
    563-599-1764


    1956 4 Wheel drive

    Submitted by Dennis Knutson <knutsond@verizon.net> on 04/Dec/2010

    Message:

    I have 1956 4 wheel drive train for sale best offer Front axel compleat rim to rim. Rear compleat rim to rin minus 3rd member. Transfer case compleat wiith shifing linkage, and mounting hardware.


    engines

    Submitted by Don Henke on 03/Apr/2011 in reply to Maintenance Report posted by Wade Jackson on 02/Apr/2011
    99.50.105.244

    Message:

    Larry Kaufman told me about 2 IH engines for sale:

    216 cu in, 6 cyls, years unknown, 1 has been overhauled at cost of $800.00, but still needs some assembly. Call George VanDyke for details and price, he is very anxious to sell and may give a low price. 618-686-2368


    Truck for sale

    Submitted by Don Henke on 03/Apr/2011
    99.50.105.244

    Message:

    Recent ad in the ATHS news letter:
    1976 IH 4070B single axle, 290 cummins motor, 10 speed fuller, 3.70 rear axle ratio, aluminum wheels. 24' 1965 Fruehauf trailer flat bed. Good titles, drive it home.
    Call Dave Shanks, St. Charles,
    . 314-413-1212


    truck for sale

    Submitted by Don Henke on 03/Apr/2011
    99.50.105.244

    Message:

    Recent ad in the ATHS newsletter:
    1950 L160 IH flat bed, stock IH motor, standard Transmission, with good solid cab.electric 2 speed rear axle. Call Glenn Saborosch
    Fletcher, MO. 573-678-2328

    Photo in newsletter shows truck--looks real good.


    Nice 1978 Trvlr for sale

    Submitted by Sean <flynnfive@hotmail.com> on 07/Apr/2011
    71.85.157.104

    Message:

    I am selling my 1978 IS Traveler. Super clean!! 345V-8, brand new paint body and top,new welded roll bar, new Holley Carb. Over 11K invested can be yours for $6900.00 OBO.
    New job requires lots of road time. Someone is getting a great Scout for a great price! My loss / your gain. Plenty of pics available. Also see on Craigs list. 636-244-7200


    Parts for 1977 S2 needed

    Submitted by Rod on 17/Apr/2011
    99.73.198.243

    Message:

    need black rear view mirror assembly..rear drivers side taillight lens and rear drivers side red marker lens..please let me know if you have any parts..thanks..god speed

    mlabinsky38@gmail.com

    Replies to this post

    Submitted by Rod on 17/Apr/2011 in reply to Parts for 1977 S2 needed posted by Rod on 17/Apr/2011
    99.73.198.243

    Message:

    need a stock radio antenna as well..forgot to add to above


    scout 800 radiator

    Submitted by bob moessmer <binderbob55@yahoo.com> on 01/May/2011
    75.106.113.228

    Message:

    for sale; scout 800 v-8 radiator. cleaned & sealed. $150.00 636 742 2388

    Replies to this post

    Submitted by darryl cox <cluelessnva@yahoo.com> on 10/Nov/2012 in reply to scout 800 radiator posted by bob moessmer on 01/May/2011
    75.192.103.194

    Message:

    I have a 67 scout 800. With a 266 V8 in it. Do you still have the radiator you have listed? Can you let me know please? Thank you.


    scout back seat

    Submitted by bob moessmer <binderbob55@yahoo.com> on 01/May/2011
    75.106.113.228

    Message:

    for sale; scout 800 rear seat. black, no rips or tears. out of a later model 800 with metal brackets underneath. $150.00 636 742 2388

    Replies to this post

    Submitted by Jesse <jtc3407@aol.com> on 06/May/2011 in reply to scout back seat posted by bob moessmer on 01/May/2011
    63.254.157.71

    Message:

    WHere are you located? And can you email photos?

    Submitted by Jerry <gepod@hotmail.com> on 31/Jul/2011 in reply to scout back seat posted by bob moessmer on 01/May/2011
    74.108.35.111

    Message:

    interested in the backseat,location?


    transport topDelete this post Submitted by Bryan Quirk <bryanquirk2260@yahoo.com> on 08/May/2011
    69.216.206.190

    Message:

    I need help transporting a top for my Cummins powered scout terra project, I'l pay all the expenses, this will include opportunity to obtain goodies from a big parts collection. The trip is from lebanon Il to Millstadt il. It would be easy to have a scout traveler to just put this top on. My "Help" for this project is unreliable so I would Hugely appreciate if anybody is willing to give a hand!!

    BQ
    618-401-3321


    scout parts and builds

    Submitted by chris selz <chris.selz@yahoo.com> on 15/May/2011
    75.132.18.129

    Message:

    i am starting to get quite a colection.i am building one now with the straight six,dana 30 front.lighter and better on gas.i am doing a dual fuel,runs propane and gas. i will have tubs,and other body parts to offer.i will be blasting them and por15 rust preventative painted,primed and ready to piant.i offer soa and spring lifts installs.i can gear,lock and install disc brakes on your axles.i also fab bumpers,front and back.with or without tire carriers.please feel free to call for any?s thanks ,chris

    Replies to this post

    Submitted by Jerry <gepod@hotmail.com> on 31/Jul/2011 in reply to scout parts and builds posted by chris selz on 15/May/2011
    74.108.35.111

    Message:

    looking for a clean 800 tub,chassis,cheap,located in Long Island,NY

    thanks


    "76 firetruck

    Submitted by Don Hneke <dehenke@msn.com> on 25/May/2011
    99.50.105.244

    Message:

    Then EastSide Fire District near my house is selling a '76 IHC model CO1950B diesel engine, pumper, Really a nice truck with good paint( green and white) ,lots of chrome, with most of the equipment on it. Asking
    $4200.00 or will be put up for auction soon.
    VIN#D1045ECA26116* Built 7-3-=75
    Has a Towers Fire Co. body.
    If interested I can arrange an appointment for you to see it, 618-514-9616, also I have some pictures.


    scout for sale

    Submitted by dave payton on 27/May/2011
    75.106.113.228

    Message:

    for sale; 1978 scout II, 345 v-8, 4 barrel carb., t-19 trans., dana 300 transfer case, roll cage. broken clutch fork. $1000.00 call dave 636-742-2473


    WANTED 304 or 345

    Submitted by Jesse <jtc3407@aol.com> on 04/Jun/2011
    63.254.157.71

    Message:

    Looking for a good running 304 or 345 complete.

    Replies to this post

    Submitted by Wade Jackson on 04/Jun/2011 in reply to WANTED 304 or 345 posted by Jesse on 04/Jun/2011
    99.109.104.251

    Message:

    I've got a 266 available... if that would work into your application (or for anyone else out there). If so, reply to the posting, and I'll get in touch with you.

    Submitted by ben <r.j.goodman@mwt.net> on 12/Jul/2011 in reply to WANTED 304 or 345 posted by Jesse on 04/Jun/2011
    207.190.124.106

    Message:

    i do believe i have a 345 v 8 mooter it was not used last year but plowed snow the year before it is compleat and is still in the scout with the snow plow my number is 419 294 8598 give me a call

    Submitted by bryan <bryanquirk2260@yahoo.com> on 08/Jun/2011 in reply to Re: WANTED 304 or 345 posted by Wade Jackson on 04/Jun/2011
    69.216.206.190

    Message:

    I have a 304 currently ina scout running, you can hear it - drive it. I'm wanting to trade for parts or work on my 51'

    618-401-3321

    Submitted by Jesse <jtc3407@aol.com> on 11/Jun/2011 in reply to Re: WANTED 304 or 345 posted by Wade Jackson on 04/Jun/2011
    63.254.157.71

    Message:

    Thanks but I am looking for a 304 first.
    Thanks

    Submitted by Leo <rodgersl@frontiernet.net> on 08/Jan/2013 in reply to Re: WANTED 304 or 345 posted by Wade Jackson on 04/Jun/2011
    74.36.216.37

    Message:

    I got a 345 in a Loadstar 1600


    A/C

    Submitted by Bryan <BryanQuirk2260@yahoo.com> on 05/Jun/2011
    216.138.49.66

    Message:

    Anybody have A/C parts for scout v8??

    618-401-3321

    Replies to this post

    Submitted by Jesse <jtc3407@aol.com> on 11/Jun/2011 in reply to A/C posted by Bryan on 05/Jun/2011
    63.254.157.71

    Message:

    I have a complete underdash AC unit.


    304 for trade

    Submitted by Bryan <BryanQuirk2260@yahoo.com> on 08/Jun/2011
    69.216.206.190

    Message:

    I have a running 304,Currently in a scout. You can hear this one run and drive it.
    This scout is going to be my trail rig and i have another motor id rather have in it.
    I'd like to trade for parts for this trail rig. Or work on my 51' L-series. - I need motor mounts fabbed in to mount a 392...

    Submitted by Jesse <jtc3407@aol.com> on 11/Jun/2011 in reply to 304 for trade posted by Bryan on 08/Jun/2011
    63.254.157.71

    Message:

    Would you just sell it? If so how much?

    Submitted by Bryan on 21/Jun/2011 in reply to Re: 304 for trade posted by Jesse on 11/Jun/2011
    69.216.206.190

    Message:

    Jesse,
    Did we talk on the phone? $300

    Submitted by Jesse on 02/Jul/2011 in reply to Re: Re: 304 for trade posted by Bryan on 21/Jun/2011
    75.221.178.40

    Message:

    Yes and I already purchased one thanks!

    Submitted by Bryan <bryanquirk2260@yahoo.com> on 27/Jun/2011 in reply to 304 for trade posted by Bryan on 08/Jun/2011
    216.138.49.66

    Message:

    I'm trying to break even on this truck, way too many project scouts. I have an addiction I just buy all kinds of things i dont need. I want to get my $n back out of this one and finish the Cummins Terra. Soon I will take off the axles and scrap the rest.

    BQ
    618-401-3321


    67 or 68 3/4 ton 2WD camper mobile pickup

    Submitted by Rick on 10/Jun/2011
    72.100.57.232

    Message:

    Anyone interested in this truck. Body and bed is in good shape, a little rust at the lower fenders and the side of the hood. I have another hood though that you can buy. The floor boards by your feet will need to be replaced.

    It is all there, has a V-8 and I did get it running for a little bit... will take some work but a great start for anyone looking for this body style. Glass is good and doors shut nice and tight.

    Submitted by bob moessmer <binderbob55@yahoo.com> on 23/Sep/2011 in reply to 67 or 68 3/4 ton 2WD camper mobile pickup posted by Rick on 10/Jun/2011
    99.196.0.57

    Message:

    hey rick; hope all is well. how much are you asking for the campermobile? do you have a title? thanks bob

    Submitted by Rick on 22/Oct/2011 in reply to Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by bob moessmer on 23/Sep/2011
    72.100.220.177

    Message:

    Bob, I'm doing well...kids are well. Still looking for that elusive time monster that keeps eating up all my spare time. Then I am going to kill it!

    I have the title somewhere... I will keep an eye out for it. let's take a drive out to Hermann MO and see if you think it is worth 600.00.

    Submitted by bob moessmer <binderbob55@yahoo.com> on 18/Dec/2011 in reply to Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by Rick on 22/Oct/2011
    99.196.0.57

    Message:

    hey rick; i know all about that time monster. sorry, i just got back to check the website. i'll make a run to hermann with you, but next week is x-mas, maybe sat. before new years. i'll try to call when i see what that weekend looks like, and if you are available.cell 314 306 5959 bob

    Submitted by RIck on 26/Dec/2011 in reply to Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by bob moessmer on 18Submitted by bob moessmer <binderbob55@yahoo.com> on 13/Feb/2012 in reply to Re: Re: Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by Rick on 25/Jan/2012
    75.105.64.39

    Message:

    hi rick; sorry, i don't check the site too often. still interested, but i have things to sell before i bring anything home. would be interested in looking sometime though. time flys. bob

    /Dec/2011
    75.221.186.232

    Message:

    I hear ya, just took time to view the website also. How about after the new year celebrations... sometime... say middle of January? I will call in the next few days.

    Submitted by Rick on 25/Jan/2012 in reply to Re: Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by RIck on 26/Dec/2011
    72.101.227.56

    Message:

    Man those next few days turned into 30 days way to fast... still interested in the truck?

    Submitted by Rick on 31/Dec/2012 in reply to Re: Re: Re: Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by bob moessmer on 13/Feb/2012
    184.20.193.222

    Message:

    The truck is still sitting in the barn, still interested?

    Submitted by bob <binderbob55@yahoo.com> on 28/Feb/2013 in reply to Re: Re: Re: Re: Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by Rick on 31/Dec/2012
    75.107.149.158

    Message:

    sorry rick, kind of forgot. would still like to see it some time. bob

    Submitted by Rick on 23/Mar/2013 in reply to Re: Re: Re: Re: Re: Re: Re: Re: 67 or 68 3/4 ton 2WD camper mobile pickup posted by bob on 28/Feb/2013
    184.20.193.222

    Message:

    Bob,
    I will be at the farm on April 20th and 21st shooting at some Turkeys with my son. See if that date fits your schedule...Come on by and take a look at the truck. You can hit a winery or two and make the day of it.


    66 travelette

    Submitted by bob moessmer <binderbob55@yahoo.com> on 31/Jul/2011
    75.106.117.31

    Message:

    for sale 66 travelette, 3/4 ton, 4x4, pto winch, fact. utility bed, 266 v-8, 4 speed, 98,000 miles drivers floor bad $3500. 636 742 2388.

    Submitted by Marshall Houston <GitRdone3454@aol.com> on 30/Dec/2011 in reply to 66 travelette posted by bob moessmer on 31/Jul/2011
    72.147.49.58

    Message:

    Is this truck still for sale?

    Submitted by bob moessmer <binderbob55@yahoo.com> on 13/Feb/2012 in reply to Re: 66 travelette posted by Marshall Houston on 30/Dec/2011
    75.106.96.58

    Message:

    sorry, just saw your message. travelette is still for sale. let me know if you want info. bob


    COMBINATIONAL VALVE/PROPORTION VALVE

    Submitted by DON HENKE <DEHENKE@MSN.COM> on 22/Aug/2011
    99.50.105.244

    Message:

    I AM LOOKING FOR A COMBINATION VALVE FOR A DISC BRAKE FRONT AXLE--1956 to 1980 scoutII--new or used. CALL ME 618-514-9616

    THANKS


    1975 Scout For Sale

    Submitted by Dik Peeler on 30/Aug/2011
    216.229.78.231

    Message:

    1975 Scout
    Brown with White Top
    345 ci
    Excellent Condition
    4x4
    A/C Blows cold with original factory system
    Power Steering, Power Brakes, Front Disc Brakes
    Removable Hard Top
    Never Smoked In
    Low Mileage
    $12600

    Call: 314 842 1610

    Replies to this post

    Submitted by Scott <Billymyth@yahoo.com> on 23/Dec/2011 in reply to 1975 Scout For Sale posted by Dik Peeler on 30/Aug/2011
    24.15.19.210

    Message:

    Pics?


    Want to buy a scout

    Submitted by Matt sims <Mattmsims@gmail.com> on 08/Sep/2011
    71.14.176.226

    Message:

    Hello, looking to buy my first scout. Something in the 70's and ready to drive. Would like to spend around 4k, but I am flexible. Thanks, Matt.
    314-303-1382

    Replies to this post

    Submitted by kyle luce on 11/Sep/2012 in reply to Want to buy a scout posted by Matt sims on 08/Sep/2011
    184.20.122.61

    Message:

    I just posted my "61 on Craigs List today on northern michigan cars and trucks by owner. It is not a 70's but why not look at the first model year. It is basically ready to drive, I've been driving it.. Worth a look. thanks, Good luck, I've heard you don't find them, they find you. Kyle, 231-598-0851

    Submitted by Frank Herboth <sfherboth@yahoo.com> on 15/Sep/2011 in reply to Want to buy a scout posted by Matt sims on 08/Sep/2011
    173.23.140.54

    Message:

    Welcome to the IH family, well almost. I do the newsletter for the club and will help get the word out. Owner or enthusiast you are welcome to come join the club at a meeting and possibly become a member, we would be glad to have you join us anytime.

    Submitted by Matt sims on 16/Sep/2011 in reply to Re: Want to buy a scout posted by Frank Herboth on 15/Sep/2011
    71.14.176.226

    Message:

    Thanks for the note back. I appreciate you spreading the word for me. I'll let you know when I find the elusive Scout. Then I'd like to attend one of the meetings. Hope to meet you soon. Matt.


    4barrel/axles/transmissions. Trade

    Submitted by Bryan <Bryanquirk2260@yahoo.com> on 13/Sep/2011
    206.59.51.3

    Message:

    I have a set of 3.07 axles, a couple 4barrel intakes, and a couple auto tranny's. I'm needind TWO flywheels for IH V8. Any trades?

    Bryan
    618-401-3321

    Replies to this post

    Submitted by Bryan on 16/Sep/2011 in reply to 4barrel/axles/transmissions. Trade posted by Bryan on 13/Sep/2011
    74.82.64.144

    Message:

    I also have a fiiberglass top for a traveler. And a gas tank. And some valve covers.


    steering box

    Submitted by chris selz on 17/Sep/2011
    75.132.18.129

    Message:

    im looking for a steering box that fits scout II.
    please e mail or call,thanks chris.selz@yahoo.com 314 960 2032

    Replies to this post

    Submitted by Jason on 20/Sep/2011 in reply to anyone have a steering box? posted by chris selz on 20/Sep/2011
    167.206.189.6

    Message:

    Chris - I have a few used ones you can look over.

    Submitted by chris selz <chris.selz@yahoo.com> on 21/Sep/2011 in reply to Re: anyone have a steering box? posted by Jason on 20/Sep/2011
    75.132.18.129

    Message:

    i just need one foe a core.ill give you a call.thanks

    Submitted by chris selz <chris.selz@yahoo.com> on 21/Sep/2011 in reply to Re: anyone have a steering box? posted by Jason on 20/Sep/2011
    75.132.18.129

    Message:

    i lost your # when i got my new phone.please call or e mail me.thanks


    66 travellette

    Submitted by bob moessmer <binderbob55@yahoo.com> on 23/Sep/2011
    75.105.128.36

    Message:

    66 travellette, 4x4, 266, 4 speed, pto winch, factory utility bed. $2500.00 636 742 2388 bob


    GAUGES

    Submitted by DON HENKE <DEHENKE@MSN.COM> on 28/Oct/2011
    99.50.105.244

    Message:

    NEED TEMP/OIL GAUGE AND AMP/GAS GAUGE.
    MINE WORK BUT DO NOT LIGHT UP.
    LET ME KNOW WHAT YOU HAVE, ADVISE PRICE AND CONDITION.

    THANKS

    Replies to this post

    Submitted by Wade on 28/Oct/2011 in reply to GAUGES posted by DON HENKE on 28/Oct/2011
    99.109.104.251

    Message:

    Do those gauges have internal light bulbs? Or, are they illuminated with dashboard light bulbs?

    Submitted by DON HENKE on 03/Nov/2011 in reply to Re: GAUGES posted by Wade on 28/Oct/2011
    99.50.105.244

    Message:

    THEY ARE REGULAR SCOUT GAUGES WITH THE BULB/SOCKET INSERTED THE BACK OF BACK OF GAUGE


    QUARTER PANELS

    Submitted by DON HENKE <DEHENKE@MSN.COM> on 28/Nov/2011
    99.50.105.244

    Message:

    I HAVE A PAIR OF NOS QUARTERS FOR A SCOUT II,
    GOOD CONDITION, WITH A LITTLE BIT OF SURFACE RUST ON SOME EDGES, STORED IN A GARAGE FOR YEARS.
    $350.00 FOR THE PAIR.
    DON, 618-514-9616.

    Replies to this post

    Submitted by DON HENKE on 04/Dec/2011 in reply to QUARTER PANELS posted by DON HENKE on 28/Nov/2011
    99.50.105.244

    Message:

    SOLD!


    Looking for 304 engine.

    Submitted by John Richie <windwardwoodwark@comcast.net> on 10/Dec/2011
    68.36.134.241

    Message:

    We are looking for a 304 or 345 to replace my aging motor in a 79 Scout II. Thanks.

    Replies to this post

    Submitted by Ed Hesik <Ed.ghesik@gmail.com> on 28/Mar/2012 in reply to Looking for 304 engine. posted by John Richie on 10/Dec/2011
    192.234.168.242

    Message:

    Hello, I have a 304 that claims to only have 60K original miles. It is mostly complete as I have been scrounging off of it, but am done. I live near Louisville, Ky and you could have the motor. It has been sitting complete and closed for more than a decade. It comes out of a '78 with a four speed. Call if you're interested. (502) 599-2376


    Factory AC for sale.

    Submitted by John Richie <windwardwoodwork@comcast.net> on 11/Dec/2011
    68.36.134.241

    Message:

    I have a complete factory AC system up for grabs. Everything is there and works to my knowledge. In good condition. Trades for other parts and partial engine trades are welcome.

    Replies to this post

    Submitted by Rick <rick@rtssentry.com> on 26/Dec/2011 in reply to Factory AC for sale. posted by John Richie on 11/Dec/2011
    75.221.186.232

    Message:

    I have engines and engine parts to trade...
    Contact me at the e-mail mentioned and we can setup a time to discuss details. Where are you located?


    poly cast wheels

    Submitted by Leon <lfihfarms@yahoo.com> on 17/Jan/2012
    216.176.74.122

    Message:

    I have I think 4 or 5 poly cast wheels. 25 each. Thanks Leon

    Replies to this post

    Submitted by Dale A. Young <ydale24@yahoo.com> on 30/Dec/2012 in reply to poly cast wheels posted by Leon on 17/Jan/2012
    68.99.83.69

    Message:

    Are the poly cast wheels still for sale? and could you send a picture of them to show me the condition of them please? I'm located in southern AZ 85614.


    Gold rims?

    Submitted by Rod <mlabinsky38@gmail.com> on 07/Feb/2012
    99.55.158.221

    Message:

    anybody have a decent set of 4 sitting on the shelf?..i might be interested in 4 of the stock gold rims in 15/7 (i think thats stock rim size) if anybody has a decent set at a very decent price..

    ps: someday i might actually have my rig on the road..rebuilding/reconditioning all the small issues has been a tedious task (fix 1 problem and find 3 more)..


    70 travelall tailgate wanted

    Submitted by spencer curry <spencer@bci-homes.com> on 09/Apr/2012
    71.204.187.224

    Message:

    Anybody have a 1970 Travelall tailgate for sale or know where to find one?

    Replies to this post

    Submitted by krawz on 02/Jun/2012 in reply to 70 travelall tailgate wanted posted by spencer curry on 09/Apr/2012
    76.1.228.78

    Message:

    I have a never used tailgate that's been sittin
    around my garage for about 38 years. One minor
    scratch on bottom. How do I tell if it is a
    1970? It is fiberglass, white top and tan
    bottom. No hardware. I live in N.J. Where are
    you located? email is krawz@earthlink.net. Spam filter will block you out until I open message. Let me know. Thanks Joe

    Submitted by DON HENKE <DEHENKE@MSN.COM> on 16/Jun/2012 in reply to Re: 70 travelall tailgate wanted posted by krawz on 02/Jun/2012
    99.50.105.244

    Message:

    HELLO KRAWZ, THAT SOUNDS LIKE A TAIL GATE FOR A SCOUT TRAVELER, WHICH WERE MADE FROM 1976 TO 1980,AND HAD A FIBERGLASS TOP AND TAILGATE.
    TRAVELALLS NEVER HAD ANY FIBERGLASS.


    wanted scout parts

    Submitted by cheryl lynn janke <cheryljanke@att.net> on 09/Jul/2012
    76.247.133.24

    Message:

    im looking for several 1961 scout parts back seat ,full top.trans mount insulators.517-4926659

    Replies to this post

    Submitted by Justin <Justin_edwards46@hotmail.com> on 07/May/2013 in reply to wanted scout parts posted by cheryl lynn janke on 09/Jul/2012
    76.181.7.141

    Message:

    Are you still looking for the transmission bushings?


    travellette for sale

    Submitted by bob moessmer <binderbob55@yahoo.com> on 23/Jul/2012
    75.105.64.52

    Message:

    my 66 travellette needs to find a new home. 4x4,pto winch,266, 4 speed, utility bed,rusty floors, all offers welcome. 636 742 2388

    Replies to this post

    Submitted by Justin Kness <paladin2211@gmail.com> on 14/Dec/2012 in reply to travellette for sale posted by bob moessmer on 23/Jul/2012
    71.194.179.160

    Message:

    Still for sale, or gone by now?

    Submitted by bob <binderbob55@yahoo.com> on 31/Dec/2012 in reply to Re: travellette for sale posted by Justin Kness on 14/Dec/2012
    75.106.114.14

    Message:

    hi justin; travellette is still available

    Submitted by Justin Kness <paladin2211@gmail.com> on 09/Jan/2013 in reply to Re: Re: travellette for sale posted by bob on 31/Dec/2012
    71.194.179.160

    Message:

    Can you give me some details? Running/driving condition, engine, transmission, running gear, options...rust status, price? If could email a couple of pictures...the ones on this site don't show much. Thanks!

    Submitted by bob moessmer <binderbob55@yahoo.com> on 20/Jan/2013 in reply to Re: Re: Re: travellette for sale posted by Justin Kness on 09/Jan/2013
    75.107.149.158

    Message:

    justin; truck was my daily driver for 10 years, been sitting for 2 or 3. starts runs drives but will need some work. was civil-defense truck. pto winch, 3/4 ton 4x4, utility bed. drivers floor is gone[rust] and has rust elsewhere.266,4 speed,98,000 miles.front tires r new. bob


    Wanted scout II tub.

    Submitted by BRANDON <Brandon.bazar@gmail.com> on 14/Aug/2012
    70.195.64.74

    Message:

    Hey guys, I'm new here from Illinois. I am looking for
    a scout 2 tub or a decent whole body. If anyone has any leads or one for sale let me know via email, or call 618.581. 4250. I would also in an entire scout for donor if the price was right.


    i.h. freezer

    Submitted by bob moessmer <binderbob55@yahoo.com> on 27/Oct/2012
    75.106.114.14

    Message:

    for sale; 1954 i.h. chest freezer model 170.good shape.$125.00 bob 636 742 2388


    Re: scout 800 radiator

    Submitted by darryl cox <cluelessnva@yahoo.com> on 09/Nov/2012 in reply to scout 800 radiator posted by bob moessmer on 01/May/2011
    75.192.103.194

    Message:

    I have a 67 scout 800. With a 266 V8 in it. Do you still have the radiator you have listed? Can you let me know please? Thank you.


    Scout 800 parts

    Submitted by Jesse Coulson <jtc3407@aol.com> on 29/Nov/2012
    199.230.123.71

    Message:

    I have a few 800 parts to get rid of,
    Very nice hood
    Good doors
    NOS side marker housings x3
    Fel Pro IH 304 complete gasket kit
    and a bunch of other things.
    Please email, it easier to track.
    Jesse
    jtc3407@aol.com

    Replies to this post

    Submitted by jl serkes <jlserkes@gmail.com> on 05/Dec/2012 in reply to Scout 800 parts posted by Jesse Coulson on 29/Nov/2012
    76.171.166.49

    Message:

    Looking for an IH or INternatiotional Emblem for the front grill of my Scout 800. Got Scout?

    Submitted by Rick on 19/Dec/2012 in reply to Scout 800 parts posted by Jesse Coulson on 29/Nov/2012
    184.20.193.222

    Message:

    I have one of the GOLD IH emblems, would this work?


    scout for sale

    Submitted by Don Henke <dehenke@msn.com> on 29/Nov/2012
    99.50.105.244

    Message:

    WELL, I AM GETTING READY TO SELL MY '72 SCOUT
    AND BUY A TRAVELAL.
    1972 SCOUT II, 345, A/T, A/C, P/B.P/S, DELUXE TRIM.
    LOW MILEAGE, GOOD TIRES, GOOD EXHAUST, RECENT CARC REBUILD, RECENT TRANS. REBUILD.
    TRAIL PROVEN. 3.73 AXLE RATIO, TRACK LOCK FRONT AND REAR. BUCKET FRONT SEATS WITH ELECTRIC AND LEATHER, NO BACK SEAT. $6500.00 obo.
    CALL 618-514-9616

    Replies to this post

    Submitted by DON on 21/Mar/2013 in reply to scout for sale posted by Don Henke on 29/Nov/2012
    99.50.105.244

    Message:

    SCOUT HAS BEEN SOLD.


    '68 TRAVELETTE

    Submitted by MARK MCCULLOUGH on 04/Dec/2012
    99.50.105.244

    Message:

    SELLING MY '68 TRAVLETTE-120, FLAT BED. $4.000.00
    PLEASE CALL FOR FULL DETAILS.
    GREAT TRUCK- ORIGINAL BED AVAILBLE
    THANKS


    Wanted- complete 71-72 Grill

    Submitted by Mike Snyder on 13/Dec/2012
    209.248.208.78

    Message:

    Im looking for a complete 71 - 72 complete Grill with light rings for ScoutII
    Thanks
    Mike

    Replies to this post

    Submitted by Frank Herboth on 15/Dec/2012 in reply to Wanted- complete 71-72 Grill posted by Mike Snyder on 13/Dec/2012
    74.34.80.19

    Message:

    I would like to help by posting in the club newsletter, but need phone number or email.

    Submitted by Mike Snyder <msnyder@colorgx.com> on 17/Dec/2012 in reply to Re: Wanted- complete 71-72 Grill posted by Frank Herboth on 15/Dec/2012
    209.248.208.78

    Message:

    Thanks Frank


    parts

    Submitted by DON HENKE <dehenke@msn.com> on 13/Dec/2012
    99.50.105.244

    Message:

    I HAVE A LOT OF MISC. SCOUT II PARTS AND MUST MOVE THEM OUT OF STORAGE AREA REAL SOON, MOSTLY SMALL PARTS. CALL ME IF YOU NEED SOMETHING, 618-514-9616.
    1 STEEL GAS TANK-32 GAL WITH ORIGNAL FLOAT.$195.00
    HEATER MOTOR WITH FAN-$25.00
    12 POLY BODY BUSHINGS-NEW-$50.00
    3" TUBE FRONT BUMPER.black, $145.00
    REAR STEP BUMPER-SAND BLASTED AND POWDER COATED-BLACK. $175.00
    LOTS OF USED STUFF, VENTS FOR KICK PANEL,HOOD RELEASE CABLES, HEATER CONTROL CABLE, DRIVE SHAFT, ARM RESTS, TIE ROD, OUTSIDE DOOR HANDLES, I SET MANIFOLDS, GAS PEDAL W ROD, BRACKET, CABLE TO CARB. DRIVE SHAFT, DISTRIBUTORS, HEADLIGHTS,
    2 SETS SLIDING WINDOWS( ONE WITH HORSE SCENE EATCHED ON IT)AUTO SHIFT LEAVER.
    WATER PUMP, AIR PUMP, STARTERS, ALTERNATORS,
    2 DISTRIBUTORS-USED
    WHOLE LOT OF USED PARTS -CHEAP OR FREE
    TAN FRONT BENCH SEAT OUT OF MY '72
    FRONT BENCH AND REAR SEAT RED- OUT OF A '73

    Replies to this post

    Submitted by chris selz <chris.selz@yahoo.com> on 26/Dec/2012 in reply to parts posted by DON HENKE on 13/Dec/2012
    75.132.1.240

    Message:

    im looking for a scout II steering box

    Submitted by DON HENKE on 27/Dec/2012 in reply to Re: parts posted by chris selz on 26/Dec/2012
    99.50.105.244

    Message:

    SORRY I DO NOT HAVE ANY, YOU BEST BET WOULD BE TO CLNTACT JASON ROEDEL. 314-489-2241

    Submitted by chris selz <chris.selz@yahoo.com> on 27/Dec/2012 in reply to Re: Re: parts posted by DON HENKE on 27/Dec/2012
    75.132.1.240

    Message:

    will do thanks

    Submitted by DON HENKE on 17/Feb/2013 in reply to parts posted by DON HENKE on 13/Dec/2012
    99.50.105.244

    Message:

    GAS TANK SOLD.

    LOTS OF OTHER PARTS NEED TO GO, SOON.

    PLEASE HELP!


    Wanted poly cast wheels

    Submitted by Dale A. Young <ydale24@yahoo.com> on 30/Dec/2012
    68.99.83.69

    Message:

    Looking for a very decent set of poly cast wheels for my 1980 Scout. Please provide a couple of pictures so I can see condition of them please.


    SCOUT

    Submitted by DON HENKE on 31/Dec/2012
    99.50.105.244

    Message:

    MARK McCULLOUGH I LOOKING FOR A SCOUT FOR TRAIL USE, ETC.

    CALL HIM @ 636-296-0975


    SS2 center skid plate

    Submitted by Rod <mlabinsky38@gmail.com> on 28/Feb/2013
    99.103.147.219

    Message:

    need stock bracket also..any body have one on a junker or in the corner of the garage taking up space?..thanks-god speed

    -could also use one of those front windshield stickers you club guys had at one time as well


    Pickup bed

    Submitted by Frank Herboth <sfherboth@gmail.com> on 12/Mar/2013
    74.34.80.75

    Message:

    Looking for a good pickup bed for a local guy restoring a 75 3/4 ton he has only a flat bed now. Any help finding one would be appreciated. I can be reached at 618-322-9348 anytime or at 618-483-5493 after 5pm.
    Thanks
    Frank

    Replies to this post

    Submitted by wade Jackson on 12/Mar/2013 in reply to Pickup bed posted by Frank Herboth on 12/Mar/2013
    99.109.104.251

    Message:

    Talk to Don. The guy who hosted the IH show in Nevada last fall had a could loose beds.


    Sportop Wanted

    Submitted by Ray <ray@akerscargill.com> on 16/Mar/2013
    67.100.123.20

    Message:

    Seeking a canvas Sportop, good to pristine condition. Any leads are appreciated. Thank you.


    77 Scout Traveler FOR SALE

    Submitted by Chris Link <christopherjlink@gmail.com> on 17/Mar/2013
    67.177.86.191

    Message:

    I'm selling my 77 Scout 4x4 345 2 bbl manual. Been in storage for many years, engine won't turn over. But the right mechanically inclined individual could get this rare truck running again in not time. $1000 firm. Bring your trailer and come get it.

    Replies to this post

    Submitted by Chris Link on 17/Mar/2013 in reply to 77 Scout Traveler FOR SALE posted by Chris Link on 17/Mar/2013
    67.177.86.191

    Message:

    Can send pics, send me an email. christopherjlink@gmail.com


    Scout II passenger inner fenders

    Submitted by Rick on 19/Mar/2013
    184.20.193.222

    Message:

    Any one have a "mostly rust free" passenger inner fender and radiator support laying around?

    I have two but they are still on the trucks and I am looking for one that may be in your way or stuck up in the rafters looking for a home. Let me know how much you want for it.

    Thanks
    Rick


    d-30 truck

    Submitted by bob moessmer on 24/Mar/2013
    75.107.149.158

    Message:

    for sale; late 30's d-30 farm truck. complete but rough. $6oo.oo


    Scout II tub

    Submitted by Rick on 15/Apr/2013
    184.20.193.222

    Message:

    Anyone have a Scout II tub that is in decent shape? Actually I only need the back half.

    Let me know what you have

    Thanks
    Rick


    1967 Scout

    Submitted by Jim Cunningham <jimrc68@gmail.com> on 24/May/2013
    97.88.199.171

    Message:

    67 scout with half cab and 6.5' plow, 4 cyl. 4 speed 4x4 lots of rust. Just south of Festus, Mo.
    $2500. call Tom (636-586-7447)for more info.
    http://i101.photobucket.com/albums/m67/Richy68/scoutfrt.jpg
    http://i101.photobucket.com/albums/m67/Richy68/scoutside.jpg


Questions/Comments about Bi-State Binders Club? Contact Us.
Questions/Comments about the Web Site? Contact the Webmaster.
© 2000-2009 Bi-State Binders